Announcement

Collapse
No announcement yet.

another SA GHS stock that I repaired

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    another SA GHS stock that I repaired

    Here is another SA GHS stock - no cartouche, that I repaired years ago, it was from the Wisconsin Barnwood. Guys use to use these stocks for a mid 1940 rifle because the stock profile is the same as the late SA SPG stock EXCEPT for the butt plate. They would have to cut the stock back, then fit the no trap SA butt plate, can not notice by eye only when you compare the stock to another or measure it. Also this stock has the small size bottom screw hole too. This stock was split from the left side of the magazine well into the barrel channel. i used Brownell's Accra Glass to repair the stock and you will notice there is no number in the barrel channel as my repair lost the number. Difficult to value but still not worth alot.

    #2
    additional photos of above stock

    Comment


      #3
      Definitely worth saving, nice work

      Comment


        #4
        One day I hope to get a stock with some marking on it. Neato

        Comment


          #5
          Nice work!

          Comment

          Working...
          X